Follow this guide, to safely pack your computer and prepare it for shipping. If you have lost your original packing materials, please contact us about purchasing replacements to ensure the safest shipping possible.

Put computer on secure surface, the front of the computer should be facing you.

Place plastic shipping bag over computer.

Place the appropriate foam packaging piece on the front of the computer, making sure the thicker side of the foam goes on the side with the vent/filter unit.

Install the other foam piece over the rear of the chassis, making sure the notch in the foam lines up with the vent on the side panel.

The foam should now fit squarely on both ends of the chassis.

Flip the chassis over so the underside is facing upward, then slide the box down over the system. Slide the box all the way down to the table, so that the top flaps are flush with the table.

Turn box over to the upright position (the door of the computer should be facing up).