Swapping your Front Panel in a Fractal R6Written on February 13, 2019 by Chad Warmenhoven
Fractal R6 Front Panel replacement
The Fractal Define R6 is a hugely versatile case and replacing the Front Panel is fairly easy and straight forward. In this article we will cover removal and installation of your Front Panel. As always, if you have any questions please don't hesitate to reach out to the Puget Systems support department, we are here to help. Enjoy!
Below is a video detailing the process and below that are written steps.
Remove Front Panel
This section will cover the replacement of the Front Panel on your Puget System
You will need a Philips head screwdriver and your replacement front panel
Remove all power going into your system and orient yourself from the front of the system
Open the front panel and locate the 2 screws that hold it to your case
Unscrew them then close the front panel
Now pull straight off your case
Grab your replacement front panel and push firmly into the front of your case
Now open the front panel and replace the screws to secure the front panel
Need help with your Puget Systems PC?
If something is wrong with your Puget Systems PC. We are readily accessible, and our support team comes from a wide range of technological backgrounds to better assist you!
Looking for more support guides?
If you are looking for a solution to a problem you are having with your PC, we also have a number of other support guides that may be able to assist you with other issues.