Puget Systems print logo

https://www.pugetsystems.com

2-port eSATA bracket

Cables and Adapters

2-port eSATA bracket Picture 14654
This is a simple, affordable bracket to take two internal SATA ports on a motherboard and route them to the back of the chassis - for use with eSATA external drives. These ports will be hot-swappable if the motherboard supports that feature (and most newer boards do).
William George (Puget Labs)
William George (Puget Labs) Says:
This bracket works great if you have SATA ports to spare on the motherboard, but if you are out of them and still need additional eSATA connections then you might need an eSATA card instead of just a bracket.
Christopher Crader (Customer Support)
Christopher Crader (Customer Support) Says:
I actually prefer these to an eSATA card, as it means one less card that might create problems. That said, if you don't have the available ports, an eSATA card will do the job.
Model: Kingwin ESAC-02

2 - Port eSATA Bracket

Supports hot-plug (Motherboard must support)

3.0 GB/s Transfer rate

eSATA I-Type connector




Configure a custom computer with the 2-port eSATA bracket.