Burn-In Process

Burn-In Process

Any time you use new computer components, you are subject to the risk of manufacturing defects, shipping damage, and many other possible sources of hardware failure. A “burn-in” process stresses the components in a system, so that if they are close to failure, we can make sure they break here – allowing us to fix or replace them before the computer gets to our customer. It is much like the way Boeing puts huge stresses on aircraft wings before flying the aircraft: if the wings have a defect, and are going to fail, they want that failure to happen before the aircraft leaves the plant. So, a burn-in test helps ensure that only hardware without defects leaves our facility.

What exactly do we do? The first test we run is very targeted, with a rigorous memory verification tool that makes sure the proper amount of system RAM is detected and that it functions without error for an extended period of time. This test also hits the CPU pretty hard, and depending on the amount of memory in the computer can last several hours. It is critical to make sure that the RAM is rock-solid before moving on, though, since misbehaving memory can cause a whole host of issues once the operating system is up and running.

Next, Windows is installed and all driver and OS updates are applied. Afterward, we run several benchmarks to collect performance data which we use to make sure the workstation is performing as expected for its particular specifications. Toward the end of that process we use a combination of utilities at the same time, with the specific intention of pushing the hardware to its limits – putting the CPU, RAM, and GPU(s) under heavy load for several minutes to ensure stable operation, before considering the PC ready for quality control. A similar system-wide stress test is run again as part of QC, where we can also monitor temperatures to ensure adequate cooling and power draw from the wall to verify that the included power supply will be able to run the computer safely.

Read what our customers have to say about our burn-in process!


Eric Finical
Rated 5 out of 5 stars

Legacy Testimonial: 965

Absolutely impeccable service. Fast build, top quality, one of the best companies I have ever dealt with.

Will never buy another computer from any other company.

Marla
Rated 5 out of 5 stars

Legacy Testimonial: 964

All the staff – Daniel, William, Christopher – have been wonderful. Unlike other manufacturers with whom I have dealt, Puget Systems does not just take the money and run after they’ve made a sale.

Marla

Tabare Alvarez
Rated 5 out of 5 stars

Legacy Testimonial: 962

Excellent service. Very personable, helpful, and well-informed. The product itself was exactly what I wanted. They listened, and they put together something that was perfect for my computing needs. They were available to field my questions at every step. I’m very happy with the experience.

Sean
Malmo, Sweden and Sacramento, California
Rated 5 out of 5 stars

Legacy Testimonial: 961

I needed a very specific type of computer built and with a small physical dimension that would allow it to be carried on an airplane. William and his colleagues at Puget Systems paid close attention to every detail I required and in an efficient manner. They are also extremely knowledgeable about all things computers and seem to be very passionate about their work and it reflected in all contact I have had with them. It’s highly unlikely I will ever buy a new computer from another vendor again. Their pricing is also very reasonable for the level of service, knowledge, and quality of their products. Lets face it, if you’re looking for a custom built computer, one expects a far higher level of service than a Dell-type experience and product; Puget Systems delivered in every possible way. These guys are terrific!

dineli
Rated 5 out of 5 stars

Legacy Testimonial: 960

Thanks for the great service and the fantastic computer!

Adrian Davies, barrister,
London (England)
Rated 5 out of 5 stars

Legacy Testimonial: 959

Puget built me a great lap top, which is compact and light to carry, but feels solid, and looks good! I am very pleased with the level of functionality attained, and will be going back to Puget for new home and work desk tops shortly. Full marks to Daniel for spot on tech support and brilliant customer service. I absolutely endorse his recommendation of the Intel SSD: it is in a different league from an old style HDD.

Adrian Davies, barrister, 3 Dr Johnson’s Buildings, Temple, London, EC4Y 7BA www.3djb.co.uk [email protected]

G.L. Baker
Austin, TX
Rated 5 out of 5 stars

Legacy Testimonial: 958

I currently have three computers that I purchased from HP over the past few years. I was looking to replace my HP Vista (32) computer that is just over 4 years old. I looked at the options that HP offered but I kept remembering how difficult it was to decrapify my HP computers. I did not want to go through that again. Plus, I wasn’t satisfied with the options that HP was offering in customizing a new computer. Dell offers even fewer options than HP. I did some searching and found Puget Systems web site. This was the start of the best computer purchase I have ever made. I was pleasantly surprised with the options offered in customizing a new computer, and that no bloatware is installed. I began my order process online on May 9, and also spoke with Jeff Stubbers, who was very knowledgeable in helping me configure my system. I wanted a computer that could handle Adobe Photoshop CS6 and Lightroom. My new Puget Serenity arrived by FedEx on May 16. It was ready to go after unpacking (packed very well). No bloatware and with recent Windows updates installed. I have put it to the test with some graphic intensive projects in CS6 and Lightroom, all with excellent performance. Plus, the Serenity is quite as advertised. Whenever I have a need to purchase another computer it will be from Puget Systems. I recommend this company to anyone looking to buy a new computer.

Craig Newmark
Rated 5 out of 5 stars

Legacy Testimonial: 957

Machine was *very* well packed and installation was excellent. So far no problems and am quite happy.

Brian
Tyler, TX
Rated 5 out of 5 stars

Legacy Testimonial: 956

Great service, great computer. The tech support always seemed perfectly happy to help me on all my questions, even the really stupid ones that with a little effort I could’ve found out for myself. Helped me every step of the way. Originally, I was going to find out what I needed, figure out the approximate cost, then build it myself, but THIS is why I bought from them. Anyways, I recommend this company to anyone looking to get a new custom computer.

Preston Birdwell
Columbia, CA
Rated 5 out of 5 stars

Legacy Testimonial: 955

As a photographer who uses wide-gamut color spaces in my work, I needed a matte, wide gamut screen for my Traverse 15″ laptop. When I saw Puget’s news release that they would be offering TFT matte screens that would display 95% of the NTSC color space, (which is very similar to Adobe RGB), I jumped on it.

After a couple of e-mails with Wilson, my sales rep, I received instructions on how to return my computer for the upgrade. Well, I have now had time to use the new screen and I am impressed! I really appreciate the matte screen for its lack of glare, good viewing angles, and clean and crisp color, even with colors that push the limits of Adobe RGB.

The upgrade was flawless, and the skill and care taken by Puget’s service and support staff was outstanding! I received updates via e-mail and regular updates under my account on Puget’s website. They also updated Windows and ran a series of benchmarks in order to ensure that when my laptop went out the door and back to me it was working as good as new.

Until this upgrade, I had never had to use Puget’s Repair/Upgrade services so I can say that they take as great a care with this service as they do when they build a new computer for you.

So, once again Puget Systems does it right! Many thanks for job well done!

Read more testimonials from Puget Systems clients.