Buy on Amazon
|Height||58 mm (2.3 in)|
|Width||133.35 mm (5.2 in)|
|Depth||133.35 mm (5.2 in)|
|Internal 2.5 inch||1|
Rubber feet not included (should come with the Jetson K1 board)
Includes mount points for a single 2.5inch hard drive on the top of the chassis, but does not include cables or mounting screws (4x ANSI M3x0.5 - 10mm). We recommend using a right-angle SATA cable if you are planning on mounting a 2.5inch hard drive.
Bottom acrylic panel
Top acrylic panel
4x .25 inch #4-40 standoffs (for under the Jetson K1 board)
4x 1.25 inch #4-40 standoffs (for on top of the Jetson K1 board)
4x .375 inch #4-40 screws (for securing the top panel to the 1.25 inch standoffs)
Configure a custom computer with the Puget Systems Acrylic Development Enclosure for NVIDIA Jetson TK1.