AMD’s Ryzen 5000 Series processors have shown stellar performance across a wide range of applications so far, and now we have the opportunity to test them head-to-head against Intel’s Core series in Autodesk Revit 2021.


AMD’s Ryzen 5000 Series processors have shown stellar performance across a wide range of applications so far, and now we have the opportunity to test them head-to-head against Intel’s Core series in Autodesk Revit 2021.

AMD’s Ryzen 5000 Series processors have shown stellar performance across a wide range of applications so far, and now we have the opportunity to test them head-to-head against Intel’s Core series in SOLIDWORKS 2020.

In the past we have found that Metashape can perform better on high core count processors when SMT is turned off, but the top CPUs at that time were Intel’s 8 & 10-core models which didn’t benefit from this trick. Now that AMD’s Ryzen 5000 Series are the fastest chips for Metashape is it worth turning SMT off on these processors, some of which do have high core counts?

PCI-Express has been the standard for connecting video cards and other expansion devices inside of computers for many years now, and several generations of the technology have now passed. With each of those generations, the amount of data that can be transferred over the PCIe connection has increased. How much impact does that have on modern video cards? Is there any benefit to running a PCIe 3.0 card in a 4.0 slot, or loss if using a 4.0 card in a 3.0 slot?

Apple has recently launched MacBook Air and Pro models using the new Apple M1 chip based on the Arm instruction set. While we do not usually examine performance for laptops, we wanted to see how these new chips compare to a desktop PC.

AMD has three current chipsets for their mainstream Ryzen processors, each targeting a different segment of the market with appropriate features and pricing. What is the difference between each of these chipsets, though? Knowing that can help make sure you get the right motherboard for your next workstation PC.

Here at Puget Systems, we have tried to be careful about sticking to CPU manufacturer memory specifications – to ensure the best reliability, and to avoid overclocking memory controllers (which could, technically, violate CPU warranties). But increasingly complicated memory speed support schemes on many newer processors, combined with a lack of supply of certain speed modules, has forced us to adopt a new approach to what we offer in our workstations.

AMD’s new Ryzen 5000 Series processors are here, with significant improvements including an advertised 19% improvement in IPC (instructions per clock). This should result in large performance gains across the board, but exactly how well do these CPUs perform in the real world?

AMD is giving us the first taste of their new Zen 3 microarchitecture in the form of four Ryzen 5000 Series CPUs. This generation is supposed to have dramatically faster per-core performance than previous AMD processors, so what sort of impact does that have on CPU-based rendering engines like Chaos Group’s V-Ray? And how do these new models fare against other AMD and Intel processor families?

AMD’s has launched the Ryzen 5000 Series, bringing with it the updated Zen 3 microarchitecture and substantial performance improvements over the previous generation. How much of an impact do those changes have on rendering in Cinema 4D? And what can we expect with regard to modeling and animation performance in the viewport?