What were the best hardware configurations for a RealityCapture photogrammetry workstation as 2020 drew to a close?


What were the best hardware configurations for a RealityCapture photogrammetry workstation as 2020 drew to a close?

In the past we have found that RealityCapture can perform better on high core count processors when SMT is turned off. With the release of AMD’s Ryzen 5000 Series processors in late 2020, those became some of the fastest chips available for RealityCapture – and the top-end models in that family sit right on the edge of where we found disabling SMT to be helpful in our older tests. So does turning SMT off help or hinder these new Ryzen CPUs?

In past testing, we found that RealityCapture benefited somewhat from adding a second video card. Is that still the case with the latest NVIDIA GeForce RTX 30 Series cards, and the recent update to RealityCapture 1.1 Blaze?

Agisoft recently released a major update to Metashape, version 1.7.0, after we had wrapped up most of our testing for a GPU performance roundup on the older 1.6.5. We’ve now tested a few video cards on the new version to see what has changed.

AMD’s Ryzen 5000 Series processors have shown stellar performance across a wide range of applications so far, and now we have the opportunity to test them head-to-head against Intel’s Core series in Autodesk Revit 2021.

If you intend to switch your drives from MBR to GPT you will likely also need to adjust your BIOS from Legacy to UEFI. This article will walk you through the basic steps including checking to determine if your system is currently in UEFI mode or not.

Master Boot Record (MBR) disks utilize the Legacy/BIOS partition table while GUID Partition Table (GPT) disks use Unified Extensible Firmware Interface (UEFI). This guide will help you convert your OS drive from MBR to GPT.

Now that we finally have performance data for NVIDIA’s GeForce RTX 3060 Ti and AMD’s Radeon RX 6900 XT, it is time for a head-to-head roundup of the GeForce RTX 30 Series and Radeon RX 6000 Series video cards in Agisoft Metashape.

DaVinci Resolve has long been known for how well it utilizes the power of your GPU, with NVIDIA being the top performer for several years. But will this continue with the recently launched Radeon RX 6900 XT, or will AMD be able to take the lead?

Adobe has been focusing fairly heavily on GPU performance in the latest versions of Premiere Pro, adding more GPU accelerated effects as well as GPU-based hardware encoding. NVIDIA typically has a strong performance lead over AMD for Premiere Pro, but will this continue with the recently launched AMD Radeon RX 6900 XT 16GB?