Swapping your Front Panel in a Fractal R6

Fractal R6 Front Panel replacement

The Fractal Define R6 is a hugely versatile case and replacing the Front Panel is fairly easy and straight forward. In this article we will cover removal and installation of your Front Panel. As always, if you have any questions please don’t hesitate to reach out to the Puget Systems support department, we are here to help. Enjoy!

Below is a video detailing the process and below that are written steps.

Remove Front Panel

This section will cover the replacement of the Front Panel on your Puget System

Step 1:

You will need a Philips head screwdriver and your replacement front panel

Step 2:

Remove all power going into your system and orient yourself from the front of the system

Step 3:

Open the front panel and locate the 2 screws that hold it to your case

Step 4:

Unscrew them then close the front panel

Step 5:

Now pull straight off your case

Step 6:

Grab your replacement front panel and push firmly into the front of your case

 

Step 7:

Now open the front panel and replace the screws to secure the front panel

Talking Head Icon in Puget Systems Colors

Need help with a Puget System?

All Puget Systems computers come with lifetime technical support. Our support team is readily accessible and comes from a wide range of technological backgrounds to better assist you!

repair icon

Looking for self-guided help?

Regardless of whether your computer was built by Puget Systems or not, if you are experiencing a problem with your workstation or server we have a large library of public support articles that you may find helpful.