Linux Live Environment

Puget provides a Tools USB with a plethora of tools preinstalled. One of the most useful is the Linux Live Environment so if you’re wondering how to access or use it, check this out!

Configuring Software Raid Within Windows 10

Most computer users have no need for more than a single drive in their computer, or perhaps a few individual drives if additional storage space is required. There are certain workflows and use cases where features of a RAID – like larger total volume capacity or data redundancy – may be extremely helpful. For large arrays, redundant boot drives, or advanced RAID modes we strongly recommend using a dedicated hardware controller card, but for simple configurations like mirroring or pooling there are options within Windows 10 which can be used without needing special hardware. This guide will cover a couple of those options and how to set them up.

Top Data Transfer Speed Slowdowns – USB

Transferring files from USB to an internal drive is something we all do but occasionally transfer speeds will slowdown to the point they’re barely usable. There are a litany of causes so we will focus on the most common and their respective solutions.

Adjusting Boot Settings From Legacy to UEFI

If you intend to switch your drives from MBR to GPT you will likely also need to adjust your BIOS from Legacy to UEFI. This article will walk you through the basic steps including checking to determine if your system is currently in UEFI mode or not.

Should I Upgrade My Puget Systems Desktop?

As a system ages your daily tasks may become increasingly difficult. Deciding whether to upgrade the components or move to an entirely new system can be daunting, hopefully this article will help.