The Tyan Thunder SX TN76-B7102 is a barebones server housed in a 2U rackmount chassis. It comes with a proprietary motherboard that fits a pair of Xeon Scalable processors, twelve memory slots, and (optionally) two or three dedicated video cards, depending on their wattage (the PSU maxes out at 1000W total system draw, or 1200W when using a 220V source). For headless server workloads, however, a video card may not be required - and the motherboard includes a basic Aspeed graphics chip with VGA output for times when direct access is required. Other PCI-Express cards could potentially be installed instead of video cards, provided they fit within the expansion card housings this chassis provides and do not require supplemental SATA or Molex power.
In terms of storage, there are two internal M.2 slots for NVMe SSDs and twelve front-accessible bays supporting either 2.5 or 3.5-inch SATA drives. Dual 10Gb Ethernet ports are included for networking, along with a third 1GbE port that is dedicated for remote management (IPMI). Connectivity is rounded out with three USB 3.0 ports (one on the front and two on the back) and one old-school serial COM port. All of this is powered by a redundant 1200W Platinum-rated power supply.
In terms of storage, there are two internal M.2 slots for NVMe SSDs and twelve front-accessible bays supporting either 2.5 or 3.5-inch SATA drives. Dual 10Gb Ethernet ports are included for networking, along with a third 1GbE port that is dedicated for remote management (IPMI). Connectivity is rounded out with three USB 3.0 ports (one on the front and two on the back) and one old-school serial COM port. All of this is powered by a redundant 1200W Platinum-rated power supply.
Note: This system can accommodate a pair of Intel Xeon Scalable processors as well as one or two NVIDIA Telsa accelerator cards. However, due to limited space inside the chassis, those cards can only be used with CPUs rated for 165W or lower TDP. Hotter chips need larger coolers, which interfere with passive GPU ducting.
Model: Tyan B7102T76V12HR-2T-G
Specifications
Socket | 3647 |
CPU Compatibility | Purley |
Form Factor | 2U |
Chipset Manufacturer | Intel |
Chipset | C620 |
Front Side Bus | DMI 3.0 |
Network Connectivity | Dual 10G Networking |
Network Controller | Intel X550-AT2 |
Cooling System | Heatsink and Fan |
Number of Fans | 12 |
Color | Black |
Memory Support | |
Type | DDR4 ECC Registered |
Maximum Speed | 2933 MHz |
Number of Slots | 24 |
Maximum Size per Slot | 64 GB |
Maximum Amount Supported | 1536 GB |
Onboard Video | |
Chipset Manufacturer | ASpeed |
Processor Type | AST2500 |
Maximum Resolution | 1920x1200 |
VGA | 1 |
External Connections | |
USB 3.2 Gen 1 (USB 3.0) | 3 |
LAN (RJ45) | 2 |
Mgmt LAN (RJ45) | 1 |
Wireless Antenna Port | No |
Serial (COM) Port | 1 |
Internal Connections | |
SATA III 6.0Gbps | 2 |
M.2 Connector | 2 |
M.2 Support | x2 80mm NVMe |
TPM (module sold separately) | 1 |
Compatible TPM | TYAN TM-TPM2-I |
Mini-SAS HD | 3 |
SATA Controllers | |
SATA III 6.0Gbps Controller 1 | Intel C621 (2x Mini-SAS HD providing 8 SATA ports) |
SATA III 6.0Gbps Controller 2 | Intel C621 (2x SATA-DOM, 1x Mini-SAS HD providing 4 SATA ports) |
Expansion Slots | |
Slot 1 | PCI Express 3.0 x16 |
Slot 2 | PCI Express 3.0 x8 |
Slot 3 | PCI Express 3.0 x16 |
Slot 4 | PCI Express 3.0 x8 |
Slot 5 | PCI Express 3.0 x16 |
Additional Information | |
SLI Compatible | No |
Crossfire Compatible | No |
RAID Support | RAID 0/1/10/5 (Intel RSTe) |
Bluetooth | No |
Integrated IO Shield | Yes |
Remote Management | Onboard |
BIOS Features | |
UEFI BIOS | No |
EZ Flash | No |
OC Profiles | No |
Dimensions | |
Height | 87.6 mm (3.4 in) |
Width | 438 mm (17.2 in) |
Depth | 760 mm (29.9 in) |
Net Weight | 28 kg (61.7 lbs) |
Features
- System
Form Factor: 2U Rackmount
Chassis Model: TN76
Dimension (D x W x H): 29.9" x 17.2" x 3.4" (760 x 438 x 87.6mm)
Motherboard Name: S7102GM2NR-2T
Motherboard Notification: # The motherboard not sold separately
Gross Weight: 37 kg (82 lbs)
Net weight: 28 kg (62 lbs)
Front Panel
Buttons: (1) ID / (1) PWR w/ LED
LEDs: (1) ID / (1) Warning
I/O Ports: (1) USB 3.0 port
External Drive Bay
Qty / Type: (12) 3.5"/2.5" Hot-Swap SSD/HDD
HDD Backplane Support: SAS 12Gb/s /SATA 6Gb/s
Supported HDD Interface: (12) SATA 6Gb/s
System Cooling Configuration
FAN: (12) 6cm fans
Power Supply
Type: RPSU
Input Range: AC 100-127V/12.47A / AC 200-240V/7.08A
Output Watts: 1,000 Watts w/ 110V -- 1,200 Watts w/ 220V
Efficiency: 80 plus Platinum
Redundancy: 1+1
Processor
Qty / Socket Type: (2) LGA3647
Supported CPU Series: Intel Xeon Scalable Processor / 2nd Gen Intel Xeon Scalable Processor
Thermal Design Power (TDP) Wattage: Max up to 205W
System Bus: Up to 10.4/9.6 GT/s with Intel UltraPath Interconnect (UPI) support
Notification: 205W CPUs are supported by purchasing FRU-TH-0220 option with certain system configurations. Please contact Tyan Technical Support for additional information.
Chipset
PCH: Intel C621
Memory
Supported DIMM Qty: (12)+(12) DIMM slots
DIMM Type / Speed: DDR4 RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 2933
Capacity: Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory channel: 6 Channels per CPU
Memory voltage: 1.2V
Expansion Slots
Pre-install TYAN Riser Card: (1) MP016T76-L16-1F # riser card for (1) PCI-E Gen3 x16 slot / (1) M7102T76-R16-2F # riser card for (1) PCI-E Gen3 x16 slot or (2) x8 slots / (1) M7102T76-L16-2F # riser card for (1) PCI-E Gen3 x16 slot or (2) x8 slots
Others: (1) PCI-E Gen3 x8 OCP 2.0 slot (conn.A+conn.C) / (1) PCI-E Gen3 x8 storage mezz. slot
Notification: # The item not sold separately
LAN
Qty / Port: (2) 10GbE ports / (1) PHY
Controller: Intel X550-AT2
PHY: Realtek RTL8211E
Storage
SATA: Connector: (2) Mini-SAS HD (8-ports)
Controller: Intel C621
Speed: 6Gb/s
RAID: RAID 0/1/10/5 (Intel RSTe)
sSATA: Connector: (2) SATA-DOM / (1) Mini-SAS HD (4-ports)
Controller: Intel C621
Speed: 6Gb/s
RAID: RAID 0/1/10/5 (Intel RSTe)
NVMe: Connector (M.2): (2) 2280 (by PCI-E interface)
Graphic
Connector type: D-Sub 15-pin
Resolution: Up to 1920x1200
Chipset: Aspeed AST2500
I/O Ports
USB: (2) USB3.0 ports (at rear) / (1) USB3.0 ports (at front)
COM: (1) DB-9 COM port
VGA: (1) D-Sub 15-pin port
RJ-45: (2) 10GbE ports, (1) GbE dedicated for IPMI
TPM (Optional)
TPM Support: Please refer to our TPM supported list.
System Monitoring
Chipset: Aspeed AST2500
Temperature: Monitors temperature for CPU & memory & system environment
Voltage: Monitors voltage for CPU, memory, chipset & power supply
LED: Over temperature warning indicator / Fan & PSU fail LED indicator
Others: Watchdog timer support
Server Management
Onboard Chipset: Onboard Aspeed AST2500
AST2500 iKVM Feature: 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
AST2500 IPMI Feature: IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface
BIOS
Brand / ROM size: AMI / 32MB
Feature: Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / User Configurable FAN PWM Duty Cycle / Console Redirection / ACPI sleeping states S4,S5 / ACPI 6.1
Operating System
OS supported list: Please refer to our AVL support lists.
Regulation
FCC (DoC): Class A
CE (DoC): Class A
CB/LVD: Yes
RCM: Class A
VCCI: Class A
Operating Environment: : Operating Temp.: 10 C ~ 35 C (50 F~ 95 F)
Non-operating Temp.: - 40 C ~ 70 C (-40 F ~ 158 F)
In/Non-operating Humidity: 90%, non-condensing at 35 C
RoHS
RoHS 6/6 Compliant: Yes
Package Contains
Barebone: (1) TN76-B7102 w/GTX GPU supported Barebone
Manual: (1) Quick Installation Guide
Installation CD: (1) TYAN Device Driver CD
Rails: (1) Rack mounting rail kit, max. to 36-inches